Problem: The filler neck on the sectors often wears out and since they are molded as one unit the entire unit needs to be replaced which is very costly. Solution: We designed the filler necks as a replaceable piece that is molded out of an engineered high-wear elastomer.
After Market Re-Designed Mining Sectors Read More »
Problem: Grain unloading terminals in the Midwest are generally very hard on their equipment because of the short-run season. They cannot afford downtime due to maintenance issues. In this issue, the customer was using our competitor’s wing pulley, and they were lasting 2 years before having to be replaced. By the second year, the wings were
Spiral Wrapped AR400 Pulley Read More »
Problem: The customer was looking for a longer-lasting engineered chain. Solution: Designed a drag chain with hardened raised rollers and machined side plate holes with pre-ground rivets. This gave us a tighter tolerance on the assembled components and greatly reduced the chain stretch.
Waste Conveyor Drag Chain Read More »
Problem: The customer needed to find someone to engineer and build a snub roller that would withstand high loads and tensions. Solution: We made several customer sight visits to gather valuable technical data which helped us to properly engineer and build this massive 8′ long roller!
Engineered Class Drive Roller Read More »
Problem: The customer needed a conveyor to transport parts through fabrication, paint, cure, assembly, and packaging. Solution: Designed and engineered a monorail conveyor to convey sheet metal parts through all manufacturing phases of their plant. This eliminated the need for a few people and streamlined their process which provided overall cost savings.
Enclosed Track Monorail Conveyor Read More »
Problem: Most inspection doors do not seal properly and leak. Maintenance departments will do practically anything to re-seal a door; including foaming the door seal. Solution: Designed a door that is dust-tight and watertight with a bolt-on internal wear liner. The wear liner can be easily replaced by un-bolting it from the pan of the door. A
Dust Tight Inspection Doors With Internal Wear Liner Read More »
Problem: Old access door to the fan housing was bolted into place, which made access for maintenance difficult. Solution: Provided powder-coated access doors with re-greaseable hinges, bolt-on internal pan liners, and a positive spring-loaded latch. The handle was also given a locking pad for a lock-out tag-out procedure.
Dust Collector Fan Housing Inspection Door Read More »
Problem: The customer had issues with pork ribs dropping 2′ onto the conveyor and breaking the plastic modular belt. Solution: Supplied a direct drop-in belt to the Series 800 Intralox Belt which has a special formula to make the belt impact and chemical resistant without affecting the overall tensile strength.
Direct Drop-In Replacement To Intralox Read More »
Problem: Our customer was looking for a supplier of Diode lasers that was built with quality at a competitive price. Solution: Divine’s partnership with their represented manufacturer allowed them to provide the lasers at a competitive price with local field support.
Positioning/Locating Diode Laser Read More »
Problem: The customer’s old scale frames were not reinforced and built to last in their harsh mining application. Since scale quality idlers must be built to a much tighter TIR than traditional idler rollers they are generally more expensive and thus it’s critical they be installed in the appropriate area within the conveyor system. Solution: Engineered and
“Lamborghini” Green Scale Quality Idlers Read More »