Case Studies

  • All
  • Case Studies
  • Conveying
  • Dust Collection
  • Food Processing
  • Gear Box Solutions
  • Industrial Manufacturing
  • Lumber/Wood Processing
  • Mining
  • Packaging
  • Power Transmission
  • Sand and Gravel
  • Water/Waste Water

Urethane Covered Transfer Rolls

Problem: OSB plant was having issues with steel rollers not transferring OSB panels …

Read More →

Safe & Ergonomic Easy Empty Container

Read More →

Food Plant Gear Box Solution

Problem: A bakery was rebuilding “ Food Duty” worm gearbox’s every 3-6 …

Read More →

Gear Hub Redesign Extends Life

Problem: Customer was experiencing downtown due to hub failures on a plastic …

Read More →

Reverse Engineered Idler Frames & Rolls

Problem: Our customer had a tough time sourcing a reliable and well-built custom …

Read More →

Lime Stone Plant – Coke Conveyor Upgrade

Problem: The Divine Sales team was challenged by a local distributor to solve …

Read More →

After Market Re-Designed Mining Sectors

Problem: The filler neck on the sectors often wears out and since they …

Read More →

Enclosed Track Monorail Conveyor

Problem: The customer needed a conveyor to transport parts through fabrication, paint, cure, …

Read More →

COST SAVINGS for Plastic Modular Belting

Problem: Customer was spending too much money on Intralox Belting. Solution: We provided a …

Read More →

Injection Molded Hose Clamps

Problem: The OEM was purchasing a machined hose clamp that due to the …

Read More →

Optimizing Through-Put (windows/doors)

Problem: A large manufacturer of window and door hardware was having issues …

Read More →

Competition Roller Failure

Problem: Plant personnel was complaining about having to hand-carry large and heavy steel …

Read More →

End of Life Conveyors

Problem: Customer had conveyors that were at the end of their life. …

Read More →

Custom Food Processing Stainless Steel Chain

Problem: The customer was looking for a cost-effective way to replace a custom …

Read More →

Troughed PVC Conveyor Rollers

Problem: Food plant wanted a light-duty unit handling troughed roller. Solution: Provided an all …

Read More →

Plastic Screw Conveyor

Problem:  The food plant could not run stainless screws in a stainless …

Read More →

Dealing with a Difficult Chain Drive

Problem: The customer had an old gearbox with a chain drive which …

Read More →

Enclosed Transfer Point On Belted Conveyor

Problem: The customer was having product spillage at a transfer point. Solution: Designed a …

Read More →

Waste Conveyor Drag Chain

Problem: The customer was looking for a longer-lasting engineered chain. Solution: Designed a drag …

Read More →

“Lamborghini” Green Scale Quality Idlers

Problem: The customer’s old scale frames were not reinforced and built to last …

Read More →

OEM Plastic Parts

Problem: The OEM was overcharging our customer for replacement custom plastic parts. …

Read More →

“Breakaway” Conveyor Line

Problem: On our customer’s “Breakaway” conveyor line, they were having to replace …

Read More →

Anti-Static Composite Roller

Problem:  A grain unloading terminal was using a heavy cast-iron return roller …

Read More →

Safety Concern ELIMINATED with Solid Corner Pulley

Problem: Canning plants across the country have old equipment that is often …

Read More →

Solving Material Spillage Issues

Problem: The customer was having material spillage issues at a transfer point …

Read More →

Steel Cable Sheave With Composite Insert

Problem: The bearings of a large steel cable pulley were worn out and …

Read More →

Timing Belt and Drive Pulley Cost Savings

Problem: A food processing OEM was looking for a cost-saving solution to …

Read More →

Increased Life in Urethane Dust Collection Application

Problem: Abrasive saw dust and wood chips were eating away the urethane …

Read More →

Urethane Carry Rollers

Problem: The OEM supplied steel carry rollers that supported the steel cable.  Over …

Read More →

Rectangular Clarifier Tank Rebuild

Problem: The municipality was using old cast steel sprockets and wall hanger bearings …

Read More →

Engineered & Manufactured Potash Conveyors

Problem: Divine’s customer was looking for engineered and robust quality fabricated belt conveyors …

Read More →

Gear Box and Screw Combo

Problem: The customer was experiencing gearbox failures every 6 months. Downtime and maintenance …

Read More →

Rubber Lined Screen Deck Clamp Rails

Problem: Abrasive sand and gravel are hard on steel clamp bars that hold …

Read More →

Urethane Food Flipper Assembly

Problem: The customer was purchasing expensive stainless steel square rod stock and …

Read More →

Bearings in a Wash-Down Application

Industry:  Food Processing  Problem: Potato Chips are salty, which tends to be …

Read More →

Polymer Steel Reinforced Gear Rack

Problem: We were approached to try and come up with a gear rack …

Read More →

Special Conveyor for Cut Vegetables

Industry:  Food Processing  Problem: The customer was using a modular conveyor belt …

Read More →
Rubber Canoe Liner Install Solves Containment Sand & Gravel Issue

Rubber Canoe Liner Install Solves Containment Sand & Gravel Issue

Problem: A very large sand and gravel mining operation was having issues …

Read More →

Industrial Flat Bottom Drag Conveyor

Problem: The customer needed a custom square bottom drag conveyor engineered, built, …

Read More →

Retrofitting Competitor Roller

Industry:  Manufacturing  Solution: Designed a “Retrofit” Roller that fits any of our …

Read More →

Full Conveyor Rebuild

Problem: A potato chip mfg. was having new conveyors built to help …

Read More →

Infeed Log Deck

Problem: The mill was not happy with the quality of the drag chain …

Read More →

Solid Lube Conveyor Roller

Problem: The bearing life in competitors’ rollers were not lasting in a …

Read More →

Cast Manganese Chain

Problem: Our customer was not happy with their supplier’s long lead times and …

Read More →

Ultra-Tuff Belt Application

Problem: Heavy product was being loaded onto an incline belt causing breakage. …

Read More →

Specialized Roller Reducing Product Contamination

Problem: Customer was using rollers with standard bearings on a paper tissue converting …

Read More →

Egg Roller Redesign

Problem: A large egg producer was looking for a supplier to manufacture …

Read More →

Custom Stainless Rollers

Problem: Our customer was having issues training their infeed belt to their …

Read More →

Outfeed Roller Redesign

Problem: Customer changed their system to a new style belt. This required …

Read More →

Urethane Chain Top

Problem: Customer was experiencing damage on their urethane non-marking chain tops. Solution: We designed …

Read More →

Belt Savings

Problem: Customer was replacing belting monthly, resulting in an expensive belt budget. Solution: Divine …

Read More →

Plastic Modular Belt Savings

Problem: The customer was replacing belting monthly, resulting in an expensive belt …

Read More →

Bucket Elevator Boot Section

Problem: The customer was running a bucket elevator chain #ER833 with K2 attachments …

Read More →

Metal Detectable Belt in Food Plant

Industry:  Manufacturing Problem: A Hot Dog Line in Ready to Eat Section …

Read More →

Plastic Screw Conveyor Flighting

Problem: customer conveys corrosive and abrasive sludge. Standard Stainless screw conveyors wear both …

Read More →

Potato Sizing Fingers- FDA Approved

Problem: The customer was using EPDM rubber fingers in their food processing plant …

Read More →

Automated Belt Cleaning System for Food Plant

Industry:  Food Processing  Problem: The belt was very labor-intensive for the sanitation …

Read More →

Urethane Chain Top Solution

Problem: Customer’s non-marking chain tops were prematurely failing due to tough seamer chain …

Read More →

Straight Freezer Tunnel-Wire Belt

Problem: Many wire belt manufacturers struggle with delivery times for custom applications. Solution:  …

Read More →

Synergy at the OEM

Problem: OEM had multiple suppliers and was looking to consolidate. Solution: Because …

Read More →

Hog Fuel Cast Drag Chain

Problem: The customer was looking for a quick delivery on an engineered …

Read More →

Stainless Steel Wash-down Unit Handling Rollers

Problem: This food plant was supplied painted carbon steel conveyor rollers and frames.  …

Read More →

Outside Conveyor with Moisture Issues

INDUSTRY: Sand and gravel PROBLEM: Customer needed a solution for his outside …

Read More →

Dust Tight Inspection Doors With Internal Wear Liner

Problem: Most inspection doors do not seal properly and leak.  Maintenance departments will …

Read More →

Dust Collector Fan Housing Inspection Door

Problem: Old access door to the fan housing was bolted into place, which …

Read More →

Sea of BLUE

Problem: A well-respected conveyor OEM contacted us looking for a quality conveyor …

Read More →

Grain Framed Idler

Problem:  Some old Grain Terminals are looking to replace their heavy, cast-iron framed …

Read More →

Custom Belt Trainer

Problem: The customer needed a heavy-duty, compact, reversing belt trainer. Solution: Divine was …

Read More →

Gear Box on Egg Shell Conveyor Line

Industry:  Food Processing  Problem: The synergy of our manufacturers often pulls us …

Read More →

Replacing Manpower with an Overhead System

Problem: The customer was using manpower to move dies from shelves to …

Read More →

Wire Mesh Conveyor Belt- “SideWinder”

Problem: Traditional balance weave wire belts have been used for years throughout the …

Read More →

Chain Drag Conveyor

Problem: This customer conveys wet cake corn and was supplied carbon steel drag …

Read More →

Solid Composite Corner Wheel

Problem:  The plant was running old cast iron, spoked, corner wheels. These were …

Read More →
Sand and Gravel Carryback

Sand & Gravel Carryback

Problem: The carryback on a load-out conveyor at a local frac sand …

Read More →

Engineered Class Drive Roller

Problem: The customer needed to find someone to engineer and build a snub …

Read More →

Injection Molded Bogey Wheels

Problem: Our customer was frustrated with their injection molding suppliers’ long lead times …

Read More →

Box Handling Monorail Conveyor

Problem: The customer needed an economical way to convey boxes from the manufacturing …

Read More →

Injection Molded Inspection Door

Problem: A large manufacturer of conveying equipment needed help reducing the overall …

Read More →

Chain Re-Design Adds Less Downtime

Problem: A customer with a conveyor that breaks down pallets was seeing insufficient …

Read More →

Wood/Pulp Mill-Engineered Dust Containment Equipment

Problem: OSHA is continuing its crackdown on combustible dust hazards. A Common issue …

Read More →

Wet Roller Application

Problem: The end user was having longevity issues; their rollers couldn’t stand up …

Read More →

Waterpark Measurement

Problem: A major water park needed help measuring parts for replacement due …

Read More →

Safety Guarding

Problem: The original safety cover on a raft conveyor infeed needed replacement …

Read More →

Paper Roll Transfer Belts

Problem: The Paper Roll belts were cracking and losing flexibility due to …

Read More →

Woodchip Screw Conveyor

Problem: To completely engineer, design and build a screw conveyor to handle flood …

Read More →

Increased Belt Life

Problem: Customer was experiencing downtime in their belting due to impact damage. Solution: We …

Read More →

Wire Conveyor Belting

Problem: A bakery was in need of a wide metal conveyor belt …

Read More →

Direct Drop-In Replacement To Intralox

Problem: The customer had issues with pork ribs dropping 2′ onto the conveyor …

Read More →

Cleated Incline Belt

Problem: A ham producer was having production issues due to the product sliding …

Read More →

Drive Pulley With Custom Tapered Shaft

Problem: Our Iron Ore mining customer was faced with replacing their main …

Read More →

Powered Rubber Finger Belt Cleaner

Problem: Traditional urethane or rubber scraper blade belt cleaners cannot be used on …

Read More →

FDA/USDA Conveyor Rollers

Problem: Traditional conveyor rollers with rolling elements are NOT 3A dairy-approved because of …

Read More →

Urethane Trunnion Wheels

Problem: The customer needed to replace worn-out trunnion wheels that were solid and …

Read More →

Positioning/Locating Diode Laser

Problem: Our customer was looking for a supplier of Diode lasers that was …

Read More →

Seizing Rollers

Problem: Competition rollers were continuously failing due to the harsh environment of …

Read More →

 Fine Sand Carryback Issues

Problem: A sand and gravel plant had fine sand carryback issues on …

Read More →

Jumping Belt

Industry: Food Processing Problem: Our customer was frustrated with their belt jumping …

Read More →

Custom Off-set Expansion Joint

Problem: A common and inexpensive band-aid for mounted process piping is to band-clamp …

Read More →

Screw Conveyor With UHMW Wear Liner

Problem: Abrasive material can prematurely wear conveyor troughs and screw flights. Solution: Lined the …

Read More →

“Eared” Stainless Steel Roller Chain

Problem: Customer needed a cost savings over the OEM they were buying this …

Read More →

Premature Chain Failure

Problem: A chip conveyor chain was seeing premature failure on the attachment …

Read More →

High Moisture Sealed Rollers

Problem: Our customer was replacing their standard conveyor rollers every 4-6 weeks due …

Read More →

Special Bucket Elevator Chain

Problem: The customer was running a bucket elevator chain #ER833 with K2 attachments …

Read More →

Impact Resistant Belt

Problem: The heavy impact from the peeled potatoes falling onto the belt …

Read More →

Chicken Press

Industry: Food Application Issue/Problem:  This conveyor uses two modular belts (top and …

Read More →

Investment Cast Stainless Steel Drag Chain-10 Year Warranty

Problem:  The maintenance department was having to adjust and maintain WH78 cast steel …

Read More →

Spiral Wrapped AR400 Pulley

Problem: Grain unloading terminals in the Midwest are generally very hard on their …

Read More →

Grip Finger Improvement

Problem: OEM fingers in bagging production machine were flagged by safety as …

Read More →

Ice Conveyor

Problem: The customer had a tough time locating the correct after-market spare …

Read More →
Scroll to Top

Enter Your Information to View