Problem: The original safety cover on a raft conveyor infeed needed replacement due to rust and sharp corners. Solution: We designed and fabricated a poly cover for the bottom of this conveyor, which will now withstand the chemicals of the pool and continue to protect the safety of the workers.
Problem: A major water park needed help measuring parts for replacement due to chlorine corrosion. Solution: The process was easy and smooth! The Divine TEAM went in after hours while the park was not running and measured all conveyor parts that needed to be replaced.
Problem: Abrasive material can prematurely wear conveyor troughs and screw flights. Solution: Lined the trough will a wear-indicated material that slips under the screw flight and lays on the bottom of the trough. This prevents metal and metal contact and extends the life of the trough and screw.
Problem: The OEM supplied steel carry rollers that supported the steel cable. Over time, this created metal fretting; which caused the steel cable to fray. Solution: Given the large and heavy steel cable, we needed to create a rolling surface with dissimilar materials. With the assistance of our factory engineers, we designed a solid steel roller mounted …
Problem: customer conveys corrosive and abrasive sludge. Standard Stainless screw conveyors wear both the OD of the screw flighting and troughs quickly. The option of adding screw conveyor hanger bearings to prolong the wear on the flights and trough is not ideal because of the high maintenance costs to maintain the bearings. Solution: Manufacture sectional UHMW flighting …
Problem: The municipality was using old cast steel sprockets and wall hanger bearings were seizing due to corrosion. Solution: Engineered, Manufactured, and supplied a total tank rebuild comprised of; composite sprockets, wall hanger bearings, chain, and flights. With the use of our engineered plastic, the moving parts in the rectangular clarifier will not corrode and prematurely fail!
Problem: The customer was looking for a longer-lasting engineered chain. Solution: Designed a drag chain with hardened raised rollers and machined side plate holes with pre-ground rivets. This gave us a tighter tolerance on the assembled components and greatly reduced the chain stretch.
Copyright © 2023 Divine Industrial Sales. Website designed by Sievers Creative
Copyright © 2023 Divine Industrial Sales
Website designed by Sievers Creative
