Recessed Splicing
Problem: Our customers’ belts had premature wear of the splicing due to the low clearance of the UHMW guards. Solution: We recessed the splicing into the belt so that there was no contact between the fasteners and guards.
Food Processing
Robotic Palletizing
Problem: A packaging customer was experiencing issues with a 50-inch-long, 1-inch-diameter roller featuring a specially milled shaft designed to fit a robotic palletizing machine. The roller’s bearings were failing due to shaft deflection and the weight of the conveyed product. Solution: Divine collaborated closely with our distributor partner to design a roller featuring specially packed
Robotic Palletizing Read More »
Extended Life in Wire Belting
Problem: The plant is running 80,000 lbs. of chicken/day, 6 days a week, and 8 hours a day. They were seeing only 400 hours of life from a competitor’s wire belt. Solution: With Divine’s expertise in conveyor belting, we were able to specify a material and extend the life with our belt to over 700
Extended Life in Wire Belting Read More »
Can Elevator Belt
Problem: Canning Plant was using a carboxylate rough top belt that was finger spliced for their can elevators. When the belt needed to be replaced because of damage, it caused downtime and is labor intensive to repair/replace. Solution: Divine, in partnership with a local distributor partner, was able to supply our spiral link belt that
Truly Endless Capper Belt
Problem: Customer was wearing through these belts quickly; roughly 5-7 belts/week. The customer is paying a little bit more for our belts, but the cost savings are speaking for themselves… (Red and green belts were what we were replacing) Solutions: We provided our belt that is truly endless /one-piece constructed (no seams), and does not
Truly Endless Capper Belt Read More »
Needed Exact Replacement Belt
Problem: Customer needed help finding an exact replacement – corrugated side wall, urethane center drive belt w/ soft hinge lacing. Solution: Divine was able to provide that belt with one of our Mfg. partners!
Needed Exact Replacement Belt Read More »
Custom Gear & Rack
Problem: The customer was looking for a custom gear and rack. Solution: We used multiple Mfg’s to design and create this unit for the customer. It is working seamlessly!
Custom Gear & Rack Read More »
Vegetable Harvesting
Problem: Two-fold = The OEM was using an inexpensive rubber belt that was stretching and wearing prematurely. Also, the pulley they were receiving from the OEM, but they were looking for a U.S. manufactured pulley that could be reverse-engineered. Solution: Divine was able to provide a superior belt and a pulley that fit the criteria
Vegetable Harvesting Read More »
Egg Conveying
Problem: Our customer was looking for a lower cost alternative to replacement belts and egg rollers for their processing facility. Solution: Divine saves the day by offering cost savings over the OEM!
Mag Elevator Can Belt
Problem: They were using a nitrile rubber with an impression cover, and the belts used for these conveyors needed to be either vulcanized or finger-spliced. The problem is this is extremely labor intensive and causes excess downtime when repairing or replacing a belt. Solution: The fabric belting was replaced and linked with a specialized mesh;
Mag Elevator Can Belt Read More »