Problem: OSHA is continuing its crackdown on combustible dust hazards. A Common issue in most pulp, paper, board, and plywood plants is the dust that is generated from the materials be conveyed in and through the plant. Solution: We engineered a chute to soft load the material on the conveyor which greatly reduces the velocity of air […]
Wood/Pulp Mill-Engineered Dust Containment Equipment Read More »
Problem: Customer was using rollers with standard bearings on a paper tissue converting machine. Due to the speed, the grease was collecting, discoloring and escaping the end of the roll, leading to product contamination. Solution: We redesigned the roll with a special bearing that could handle the application while eliminating the lubrication issue.
Specialized Roller Reducing Product Contamination Read More »
Problem: The customer was looking for a quick delivery on an engineered cast chain in their mill. Solution: Divine teamed up with the local distributor to provide a heavy-duty cast chain with special flights.
Hog Fuel Cast Drag Chain Read More »
Problem: Abrasive saw dust and wood chips were eating away the urethane dust collection hose quickly. Solution: We worked closely with our manufacturer and local stocking distributor to come up with a smooth non-directional urethane dust collection hose that lasts on average 25% longer than their old directional urethane hose. Maintenance personnel installing the hose
Increased Life in Urethane Dust Collection Application Read More »
Problem: The mill was not happy with the quality of the drag chain supplied by the original equipment manufacturer. Solution: Divine was contacted by our local distributor to provide them with quality engineered drag chain complete with flights and sprockets.
Problem: The maintenance department was having to adjust and maintain WH78 cast steel drag chain and sprockets running in wet pulp on a weekly basis. A full replacement with new chain and sprockets were being replaced on an annual basis. Solution: Supplied the only cast stainless steel 78 chain on the market that has 35,000# ultimate strength
Investment Cast Stainless Steel Drag Chain-10 Year Warranty Read More »
Problem: Our customer was not happy with their supplier’s long lead times and lack of a quality-made chain. Solution: With the help and partnership of our local distributor we were able to stock our chain in the distributor’s warehouse for quick shipments. We also offered them a written QC procedure that we strictly adhere to. This gave
Cast Manganese Chain Read More »
Problem: A customer with a conveyor that breaks down pallets was seeing insufficient life out of their chain flights. Frozen pallet boards were putting too much stress on the top welded flights and they would snap off, causing the conveyor system to be ineffective. Solution: Redesigned lugs with side “ears” to improve the weld surface on the
Chain Re-Design Adds Less Downtime Read More »
Problem: Most inspection doors do not seal properly and leak. Maintenance departments will do practically anything to re-seal a door; including foaming the door seal. Solution: Designed a door that is dust-tight and watertight with a bolt-on internal wear liner. The wear liner can be easily replaced by un-bolting it from the pan of the door. A
Dust Tight Inspection Doors With Internal Wear Liner Read More »
Problem: The customer needed to find someone to engineer and build a snub roller that would withstand high loads and tensions. Solution: We made several customer sight visits to gather valuable technical data which helped us to properly engineer and build this massive 8′ long roller!
Engineered Class Drive Roller Read More »