Problem: Food plant wanted a light-duty unit handling troughed roller. Solution: Provided an all PVC 3 roll troughing roller with stainless steel wash-down bearings. This is totally corrosion-resistant and FDA-compliant.
Troughed PVC Conveyor Rollers Read More »
Problem: Traditional balance weave wire belts have been used for years throughout the automotive, baking, building products, carpet manufacturing, electronics, food processing, glass, poultry, and packaging industries. Existing wire belts have a very short life span, especially in heavy-use areas. They tend to stretch as they are a mostly friction-driven conveyor set-ups; this takes a lot
Wire Mesh Conveyor Belt- “SideWinder” Read More »
Problem: Our customer was replacing their standard conveyor rollers every 4-6 weeks due to wash down, mud, and their 24/7 run time. Solution: We supplied our High Moisture Seal in the end of the conveyor rollers. This roller contains a triple labyrinth seal; a felt seal, grease, and an anti-lock seal. AND, can you believe… this roller
High Moisture Sealed Rollers Read More »
Problem: Customer was experiencing downtime in their belting due to impact damage. Solution: We had them install Safari Belting 225 series in our Ultra Tough material on the conveyors. This led to a significant reduction in their downtime, and cost savings.
Increased Belt Life Read More »
Problem: The food plant could not run stainless screws in a stainless trough due to the potential for SS shavings getting into the final product. Solution: Divine was approached by a local distributor to provide an all-plastic FDA screw conveyor with a pipe sleeved for rigidity. We were able to supply these cost-effectively and under the
Plastic Screw Conveyor Read More »
Problem: A ham producer was having production issues due to the product sliding off of their incline belt. Solution: Interchangeable flights were added to the belt, which helped to push the product through the system; thus, reducing downtime.
Cleated Incline Belt Read More »
Problem: Some old Grain Terminals are looking to replace their heavy, cast-iron framed idlers. Many of the original assemblies are not available for replacement. Solution: We have designed and built an all-in-one idler and return roller framework that bolts directly to the floor. This is a direct replacement (form, fit, and function), for the original Dodge cast-iron
Grain Framed Idler Read More »
Problem: A grain unloading terminal was using a heavy cast-iron return roller assembly. The castings were heavy for maintenance workers to carry, and replacement costs were expensive. Solution: With the help of our manufacturers’ engineering staff, we designed and built a prototype that could be injection molded due to the high usage of rollers per year.
Anti-Static Composite Roller Read More »
Problem: Customer was spending too much money on Intralox Belting. Solution: We provided a belt that costs 20% less upfront. This was a direct drop-in belt for the customer’s existing belt, eliminating the need for a sprocket change out. These upfront cost savings allowed them to utilize their resources in other ways. These pictures shown are taken
COST SAVINGS for Plastic Modular Belting Read More »
Problem: The customer was looking for a cost-effective way to replace a custom OEM chain. Solution: Provided cost savings by reverse engineering this custom stainless steel OEM chain with replaceable UHMW rollers.
Custom Food Processing Stainless Steel Chain Read More »