Problem: OSB plant was having issues with steel rollers not transferring OSB panels effectively. Solution: With the help of our local distributor, we were able to get rollers covered to help with friction on the underside of the OSB panels.
Urethane Covered Transfer Rolls Read More »
Problem: The customer needed to replace worn-out trunnion wheels that were solid and mounted directly off a hydraulic motor. Solution: We engineered and manufactured split urethane trunnion wheels. Being able to supply split wheels allowed easy and quick change-out when they needed to be replaced.
Urethane Trunnion Wheels Read More »
Problem: Traditional balance weave wire belts have been used for years throughout the automotive, baking, building products, carpet manufacturing, electronics, food processing, glass, poultry, and packaging industries. Existing wire belts have a very short life span, especially in heavy-use areas. They tend to stretch as they are a mostly friction-driven conveyor set-ups; this takes a lot
Wire Mesh Conveyor Belt- “SideWinder” Read More »
Problem: To completely engineer, design and build a screw conveyor to handle flood fed wood-chips. Solution: After our field assessment, we were able to provide 2 custom engineered and manufactured 48″ screw conveyors. These will run 24 hours a day, 7 days a week; reliability was of utmost importance.
Woodchip Screw Conveyor Read More »
Problem: OSHA is continuing its crackdown on combustible dust hazards. A Common issue in most pulp, paper, board, and plywood plants is the dust that is generated from the materials be conveyed in and through the plant. Solution: We engineered a chute to soft load the material on the conveyor which greatly reduces the velocity of air
Wood/Pulp Mill-Engineered Dust Containment Equipment Read More »
Problem: Abrasive sand and gravel are hard on steel clamp bars that hold the vibrating screen decks down. A distributor approached us to see if we had a solution for longer wear life. Solution: We built a jig to ensure consistency and have a process in place to clean, prep and apply our special high-wear rubber to
Rubber Lined Screen Deck Clamp Rails Read More »
Problem: The plant was running old cast iron, spoked, corner wheels. These were dangerous for the workers because of the possible pinch point as the wheel rotates. Solution: We partnered with our manufacturer to create a solid composite wheel with a pressed-in bearing. This new unit is now completely corrosion resistant, safe, and will run for many
Solid Composite Corner Wheel Read More »
Problem: Some old Grain Terminals are looking to replace their heavy, cast-iron framed idlers. Many of the original assemblies are not available for replacement. Solution: We have designed and built an all-in-one idler and return roller framework that bolts directly to the floor. This is a direct replacement (form, fit, and function), for the original Dodge cast-iron
Grain Framed Idler Read More »
Problem: Our customer was replacing their standard conveyor rollers every 4-6 weeks due to wash down, mud, and their 24/7 run time. Solution: We supplied our High Moisture Seal in the end of the conveyor rollers. This roller contains a triple labyrinth seal; a felt seal, grease, and an anti-lock seal. AND, can you believe… this roller
High Moisture Sealed Rollers Read More »
Problem: The customer was looking for a quick delivery on an engineered cast chain in their mill. Solution: Divine teamed up with the local distributor to provide a heavy-duty cast chain with special flights.
Hog Fuel Cast Drag Chain Read More »