Problem: Customer had too much product sticking to the belt (using Intralox 800 series flat top), which resulted in waste. Solution: Divine supplied the customer with a modular belt with proprietary properties, as well as a dimple top and amazing release, which reduced the amount of belt surface contact. The end user noticed an immediate […]
Problem: A packaging customer was experiencing issues with a 50-inch-long, 1-inch-diameter roller featuring a specially milled shaft designed to fit a robotic palletizing machine. The roller’s bearings were failing due to shaft deflection and the weight of the conveyed product. Solution: Divine collaborated closely with our distributor partner to design a roller featuring specially packed
Robotic Palletizing Read More »
Problem: The plant is running 80,000 lbs. of chicken/day, 6 days a week, and 8 hours a day. They were seeing only 400 hours of life from a competitor’s wire belt. Solution: With Divine’s expertise in conveyor belting, we were able to specify a material and extend the life with our belt to over 700
Extended Life in Wire Belting Read More »
Problem: OEM customer was building a new machine and looking for a belt to best fit the application. Solution: We created an endless belt on a new design for an OEM partner.
Problem: Canning Plant was using a carboxylate rough top belt that was finger spliced for their can elevators. When the belt needed to be replaced because of damage, it caused downtime and is labor intensive to repair/replace. Solution: Divine, in partnership with a local distributor partner, was able to supply our spiral link belt that
Problem: The belt and flights were breaking due to chemical attack; becoming brittle and soft, and fading in color. The customer had to shut the lines down numerous times and toss product because of the belt breakage and mixing with the final cheese product. Solution: We put in our patented belt, and have not had
Belting for the Cheese Industry Read More »
Problem: Our Customer was using a competitors rollers which were pre-maturely failing (stopped spinning and locking up), requiring replacements every 2-3 months. Solution: We replaced miles of their conveyors with Luff rollers, and they solved the issue! They have been running for over a year already.
Problem: Laundry facility has 250 lbs. of wet linen sheets dropping onto a conveyor. This created a massive shock load which caused the conveyor frame to bend and tear apart in spots. Solution: Installed a shock-absorbing 3/4″ thick urethane below the drop zone to dissipate the vibration of the conveyor. The customer is very pleased
Drop Zone Shock Absorption Read More »
Problem: Two-fold = The OEM was using an inexpensive rubber belt that was stretching and wearing prematurely. Also, the pulley they were receiving from the OEM, but they were looking for a U.S. manufactured pulley that could be reverse-engineered. Solution: Divine was able to provide a superior belt and a pulley that fit the criteria
Vegetable Harvesting Read More »
